◎ Do not collide when loading and unloading and carrying. The bottom of means of transport must be flat, and the fixing measure must be taken after the truck loading, so as to ensure to have no displacement and sliding collision in transit.

◎ When lifting or carrying, the whole stack of board must be piled neatly, to prevent the steel rope or forklift and shovel from damaging the edge of plate.

◎ When loading and unloading one by one manually, it must pay attention to prevent the fragment and sundries from clamping between the plates, and in case of failing to timely clean, the plate may be cracked or deformed.

◎ When carrying the board, the two sides of board shall be handheld by two hands to vertically carry. No lifting up horizontally.

◎ The board shall be stacked on the flat ground or the placed in the bottom with special wooden pallet, and a few disperse plates cannot be upright against the wall.

◎ The board shall be placed in the indoor warehouse, and covered with the tarpaulin in case of outdoor storage.